Start Menu-Connect-Isdn Remote - Panasonic KX-TDA100 Pc Programming Manual

2.2 Start Menu
2.2.7 Start Menu—Connect—ISDN Remote
Connects to the PBX in Interactive mode using the ISDN TA interface of the PBX.
This method is only available when a user-supplied ISDN TA that supports CAPI 2.0 is used, and
Remote—ISDN Remote Floating Extension Number of the 2.18.1 [11-1] Main screen is set.
This option allows direct entry of connection parameters, for cases where the PC is used to connect
to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to
multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.2.8 Start
Menu—Connect—Profile Setup for more details about creating profiles.
To connect to the PBX by ISDN Remote
1.
From the start menu, select Connect.
The Login window will be displayed.
2.
Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a.
b.
• To enter the parameters manually, select the PBX Model and confirm that the ISDN Remote
radio button is selected.
a.
b.
3.
Click Connect.
Connection Setting for ISDN Remote
Setting
Dial Number
44 PC Programming Manual
Select the profile to use from the drop-down list.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
Specify the settings as required. For more details, see the table below.
Enter the system password for the PBX.
Values
30 digits (consisting of
1-9, 0, *, #, -, and ","
[comma])
Explanation
Enter the telephone number to be dialled to
access the PBX.