Panasonic KX-TDA100 Pc Programming Manual page 602

2.11 [4] Extension
Feature Guide References
1.21.1.12 ISDN Service Access by Keypad Protocol
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 2.16.4 [9-4] NDSS Key
Table can be specified here.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.11.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Value Range
1–8
Maintenance Console Location
2.11.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Guide References
2.2.4 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, ICD Group, SDN)
Specifies the ring tone type.
Value Range
KX-T7600 series (except KX-T7665)/IP-PT (except KX-NT265/KX-NT321): 1–30
KX-T7665/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
602 PC Programming Manual