Panasonic KX-TDA100 Pc Programming Manual page 453

Programming Manual References
None
Feature Guide References
None
ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for
networks that disconnect a call if an alert message is not received.
Value Range
Mode1: Disable
Mode2: Enable
Maintenance Console Location
2.9.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
Option 6 (CTI)
1st Party CTI—System status retry interval timer
Specifies the length of time until the alive check is retried when no response is received, for First Party
Call Control CTI.
Value Range
0–60 s
Maintenance Console Location
2.9.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.32.1 Computer Telephony Integration (CTI)
1st Party CTI—System status retry counter
Specifies the number of times that the alive check is repeated for First Party Call Control CTI. When
the alive check has been attempted the programmed number times without success, the PBX
assumes that the logical connection with the CTI application software has been lost.
2.9 [2] System
PC Programming Manual 453