2.18 [11] Maintenance
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
External Modem Command—Automatic Initialisation
Specifies the command to automatically initialise an external modem when it is plugged into the Serial
Interface (RS-232C) port of the PBX.
Value Range
Max. 30 characters
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
External Modem Command—Manual Initialisation 1–Manual Initialisation 5
Specifies the command to manually initialise an external modem. The command specified here is
controlled by PT system programming (External Modem Control [801]).
Value Range
Max. 30 characters
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
794
PC Programming Manual