Programme Launcher-Connect-Isdn Remote - Panasonic KX-TDE100 Programming Manual

2.2.7 Programme launcher—Connect—ISDN Remote
Connects to the PBX in Interactive mode using the ISDN TA interface of the PBX.
This method is only available when a user-supplied ISDN TA that supports CAPI 2.0 is used, and
—ISDN Remote Floating Extension Number of the 13.1 [11-1] Main screen is set.
This option allows direct entry of connection parameters, for cases where the PC is used to connect to one or
just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs and
would prefer to choose from among pre-saved profiles instead, see 2.2.8 Programme launcher—Connect
—Profile Setup for more details about creating profiles.
To connect to the PBX by ISDN Remote
1.
From the programme launcher, select Connect.
The Login window will be displayed.
2.
Select a connection option.
•
Select a Profile Name if you want to use a pre-saved profile.
a.
Select the profile to use from the drop-down list.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
•
To enter the parameters manually, select the PBX Model and confirm that the ISDN Remote radio
button is selected.
a.
Enter the system password for the PBX.
b.
Specify the settings as required. For more details, see the table below.
3.
Click Connect.
Connection Setting for ISDN Remote
Setting
Dial Number
Values
30 digits (consisting of
1-9, 0, *, #, -, and
"," [comma])
2.2.7 Programme launcher—Connect—ISDN Remote
Explanation
Enter the telephone number to be dialled to
access the PBX.
Remote
PC Programming Manual 43