Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Feature Guide References
None
4.7.12 LCO Port [1-4] Port Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.11 LCO Port [1-4]
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporal non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.11 LCO Port [1-4]
Feature Guide References
None
4.7.13 Extension Port [1-5]
Various settings can be programmed for each extension port.
4.7 Configuration [1]
Feature Guide
341