Making Changes To Call Forward On Busy - Nortel Enterprise Edge Feature Programming Telephone Manual

26 Frequent programming operations
Change the number of times the telephone rings before it is forwarded
After you have assigned a Fwd no answer destination, you can set the number of
times the telephone rings before the call is forwarded.
1. Select Terminals & Sets.
2. Select a DN number.
3. Select Capabilities.
4. Double-click Call Forward.
5. Choose a Fwd no answer delay setting: 2, 3, 4, 6 or 10.

Making changes to Call Forward on Busy

Terminals & Sets
Capabilities
Call Forward
You may also set Call Forward to forward all calls to either an internal or external
telephone number. This is done at the telephone set by pressing
more information about Forward All Calls, see
1. Select Terminals & Sets.
2. Select a DN number.
3. Choose Capabilities.
4. Double-click Call Forward.
Enterprise Edge Feature Programming Telephone Guide
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward no
answer feature is overridden and the Hunt Group call continues to ring until
the hunt time has expired. For more information on Hunt Groups see
Programming Hunt Groups
You can program a telephone to forward a call when the
line is busy to either an internal telephone (for example,
221) or an external telephone (for example, 9-123-
4567). Additionally, you can route the call to a
destination code. For more information about
programming destination codes, see the chapter
"Systems operations" in the Enterprise Edge
Programming Operations Guide.
on page 101.
Forwarding your calls
. For
ƒ›
on page 65.
P0908510 Issue 01