Table of Contents
Advertisement
Copyright © 2007-2008 Nortel Networks
.
(continued)
Verify that HSM-SO iKey (purple) is inserted in card 1
(with flashing LED).
Hit enter when done.
Enter the current HSM-SO password for card 1:
iSD 192.168.128.185 deleted. Logging out.
The ASA 310-FIPS device is now removed from the cluster and
reset to its factory default settings. Both HSM cards are also
reset, which means that all sensitive cryptographic information
stored on the cards is deleted. The next time a user turns on
the ASA 310-FIPS device, the Setup menu will be displayed
after having logged in as the admin user through a console
connection.
When selecting new or join in the Setup menu, you will be
prompted to insert the HSM-SO iKey and HSM-USER iKey
associated with each HSM card, and provide the current
password stored on the respective iKey. This is required to
initialize the HSM card anew. After you have provided the correct
password for the iKey being requested by the Setup utility, a new
passwords can be defined for that iKey.
For more information about installing and adding ASA 310-FIPS
device in a cluster, see
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Boot User Password 157
" Installing an ASA 310-FIPS" (page
--End--
58).
Advertisement
Table of Contents
