Table of Contents
Advertisement
122 Certificates and Client Authentication
4
5
6
7
Copyright © 2007-2008 Nortel Networks
.
>> Automatic CRL# passwd
Current value: ""
Enter password:
Set the time interval for retrieving CRLs from the resource
you have specified using the url command.
If you want to specify a time interval in minutes, hours or days,
enter an integer directly followed by the letter m, h, or d.
The default interval is 1 day (1d). The shortest time interval
allowed is 601 seconds (10 minutes and 1 second).
>> Automatic CRL# interval
Current value: 1d
Enter refresh interval:
Specify which CA certificates are valid signers of the
certificate revocation lists you retrieve.
To get an overview over all available certificates, enter the
/info/certs command.
When specifying more than one certificate, use commas to
separate the corresponding index numbers. Example: 1,2,5
To clear all specified CA certificates, press ENTER when asked
to enter certificate numbers, then answer yes to the question if
you want to clear the list.
>> Automatic CRL# cacert
Current value: ""
Enter certificate numbers (separated by comma):
Enable automatic retrieval of CRLs.
>> Automatic CRL# ena
When using the apply command the first time after having
enabled automatic retrieval of CRLs, a first retrieval is invoked
immediately. After that, retrievals will occur at the specified time
interval (where the default value is once every 24 hours).
Apply the changes.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
--End--
Advertisement
Table of Contents
