Update Existing Certificate; Nortel Vpn Gateway; User Guide - Nortel NN46120-104 User Manual

Update Existing Certificate
Whenever you wish to substitute an existing certificate for a new
certificate, you should keep the existing certificate until it is verified that the
new certificate works as designed.
Create a New Certificate
Step
1
2
3
4
Copyright © 2007-2008 Nortel Networks
.
Action
Check the certificate numbers currently in use.
>> Main# cfg/cur cert
If for example, two different certificates exist as Certificate 1 and
Certificate 2, create Certificate 3 for your new certificate.
Add a certificate with a new certificate number.
>> Configuration# cert
Enter certificate number: (1-1500) 3
Creating Certificate 3
Add the new certificate according to the instructions in
"Adding Certificates to the NVG" (page
Map the new certificate to the desired servers.
The following example refers to a virtual SSL server used for
SSL acceleration. To map the certificate to a portal server in a
VPN, use the /cfg/vpn #/server/ssl/cert command.
>> Configuration# ssl/server
Enter virtual server number: (1-256) 1
>> Server 1# ssl
>> SSL Settings# cert
Current value: 2
Enter certificate number: (1-1500) 3
After you have tested that the new certificate works fine you may
delete the old certificate(s).

Nortel VPN Gateway

User Guide

NN46120-104 02.01 Standard
14 April 2008
Create a New Certificate 107
99).
--End--