Internet Fax Settings; Speaker Volume Settings - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS
Add a Footer Automatically to the Mail Message Body
You can add any text as a footer to the body message of e-mail.
Mail Footer Registration
When [Add a Footer Automatically to the Mail Message Body] is enabled, set a maximum of 900 full-width/half-width
characters for the footer.
Subject Name Settings
You can save a preset subject for transmitted files. Click the [Add] key and set a maximum of 80 full-width/half-width
characters for the subject.
File Name Settings
You can save a preset file name for transmitted files. Click the [Add] key and set a maximum of 80 full-width/half-width
characters for the file name.
Message Body Settings
You can save a preset e-mail subject and body message (fixed text). Click the [Add] key and set a maximum of 80
full-width/half-width characters for the subject, and a maximum of 1800 full-width/half-width characters for the body
message (fixed text).

Internet Fax Settings

Settings related to the image send function (Internet fax, Direct SMTP, etc.) can be configured.
For an explanation of settings related to the fax function, see
These settings can be configured when the Internet fax expansion kit is installed.
Default Settings
Configures the default settings for Internet fax.
Resolution Setting
Apply the Resolution Set when Stored
You can apply the resolution setting that was set when the file was saved to transmission of the file.
Resolution Setting
Set the resolution used for file transmission.
Half Tone
Enable half-tones.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "On") and an Internet fax is received, this function
activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power] button) is switched "On".
Compression Setting
This is used to set the default compression mode for Internet fax transmission.
The following settings can be configured.
• MH (G3)
• MMR (G4)

Speaker Volume Settings

Adjusts the volume of fax receive signals and communication error signals heard through the speaker.
A fax receive signal sounds after the machine checks the mail server and retrieves received faxes. A communication
error signal sounds when a delivery failed e-mail is received from the destination Internet fax machine.
"Image Send Settings (page
7-98
7-171)".