Printing By Mopria - Sharp MX-3050N User Manual

PRINTER►APPENDIX

PRINTING BY MOPRIA

Mopria is a standard for sending and receiving print jobs by wireless LAN between a mobile device or other client device
and a printer that supports Mopria.
The procedure for printing using the Mopria function on the machine is explained here.
To use this function, you must first install the Mopria plugin on your mobile device.
Settings on the machine
Before using this function, configure the settings below in "Settings (administrator)".
• If the machine's user authentication function is enabled, turn off "Settings (administrator)" - [User Control] - [Default
Settings] - [Disable Printing by Invalid User].
• If user authentication is enabled in the Sharp OSA application, allow printing by invalid users in the application.
• Configure the machine settings in the Mopria settings. For Mopria settings, refer to
Print settings
You can print using the Mopria plugin.
Functions that can be enabled from the application are as follows.
Item
Copies
Print Colour
Page Select
Paper Size
Orientation
2-Sided Print
Resolution
Fit Page
Output Tray
Print per Unit
Print jobs from Mopria are handled as invalid user jobs on the machine. The jobs are treated as printer jobs in the job log.
Send a file
Mobile device
1-999
Auto, Black & White, Colour
-
A4, A3, A5, B4, B5, A3W, Ledger, Legal, Letter, Invoice, Executive, Foolscap, 8 1/2 x
13 2/5, 216 x 343, 8K, 16K
Portrait, Landscape
None, Book, Tablet
600x600, 1200x1200
On, Off
Centre Tray, Right Tray, Upper Tray, Middle Tray, Lower Tray
On, Off
Print
Description
3-95
"Mopria Settings (page 7-140)".