Sharp MX-3050N User Manual page 499

FACSIMILE►OTHERS FUNCTION
Tap the [Others] key, and tap the [Transaction Report] key.
3
4
Others
Transaction
Report
Do not Print
Print at Error
Always Print
Print Original Image
Back
reception memory
To cancel the transaction report setting:
Tap the [Do not Print] key.
• The print conditions for a transaction report are as follows:
•"Always Print": A transaction report is printed no matter whether the transmission succeeds or fails.
•"Print at Error": A transaction report is printed when transmission fails.
•"Do not Print": Do not print a transaction report.
• Set the [Print Original Image] checkbox to
• Even if the [Print Original Image] checkbox is
transmission, direct transmission, polling reception, or F-code transmission is used.
Tap the [Start] key to start scanning of the original.
5
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
• When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and
then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.
When you use the automatic document feeder to scan an original, you can tap the [Preview] key to check a preview of
the image before sending a fax. For more information, see
4-30)". However, settings for this function cannot be changed in the preview screen.
Tap the key of the print settings.
After the settings are completed, tap
sequence.
CA
Preview
Start
Speaker
100%
to include part of the transmitted original in the transaction report.
, the original cannot be printed when speaker dialling, manual
"CHECKING THE IMAGE TO BE TRANSMITTED (page
4-104
and [Back] keys in