Information Appearing In The Result Column - Sharp MX-3050N User Manual

SCANNER/INTERNET FAX►INTERNET FAX RECEPTION FUNCTIONS

INFORMATION APPEARING IN THE RESULT COLUMN

Error types and other information are printed in the result column of transaction and activity reports. When a transaction
or activity report is printed, check the result of the transaction in the result column and take action as needed.
Examples of messages that are printed in the result column
Print Page
OK
Cancel
FULL
Rejected
Report Wait
NG LIMIT
E-mail
FAIL xx (xxxx)
displayed
dispatched
processed
deleted
denied
failed
If the receiving machine is a SHARP machine, the receiving machine will return "dispatched" if the fax was received
normally, or "processed" if reception failed.
The transaction was completed normally.
A transmission was stopped while in progress, or a reserved transmission job was cancelled.
The memory became full during reception.
An Internet fax was sent from a party that is blocked.
Transmission confirmation was enabled, but transmission confirmation was not received within the
set time.
Transmission was not possible because the file size exceeded the machine's file size limit setting.
An e-mail was received, however, the attached file was not a TIFF-F file or there was no attached file,
and thus printing was not possible.
The transaction failed due to a communication error.
First 2 digits of communication error number: Error code from 00 to 99.
Last 4 digits of communication error number: Code for use by service technicians.
Displayed at the receiving machine.
Forwarded elsewhere before being displayed at the receiving machine.
Processed without being displayed at receiving machine.
Message deleted at receiving machine.
Receiving machine refused to notify sending machine of message processing content.
An abnormal condition occurred.
Description
5-113