Sharp MX-3050N User Manual page 626

SCANNER/INTERNET FAX►OTHER FUNCTIONS
5
Others
Transaction Report
Do not Print
Print at Error
Always Print
Print Original Image
Back
reception memory
To cancel the transaction report settings:
Tap the [Do not Print] key.
• The print conditions for a transaction report are as follows:
• "Always Print": A transaction report is printed no matter whether the transmission succeeds or fails.
• "Print at Error": A transaction report is printed when transmission fails.
• "Do not Print": Do not print a transaction report.
• Set the [Print Original Image] checkbox to
Tap the [Start] key to start scanning of the original.
6
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
When you use the automatic document feeder to scan an original, you can tap the [Preview] key to check a preview of
the image before sending an image. For more information, see
5-62)".
Tap the key of the print settings.
After the settings are completed, tap
sequence.
Preview
CA
Start
Receive
100%
to include part of the transmitted original in the transaction report.
5-104
"CHECKING THE IMAGE TO BE TRANSMITTED (page
and [Back] keys in