Internet Fax Settings; Default Subject - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS
Session Page Counter
You can add counter information to the file name.
Unique Identifier
An ID number can be created for each file and added to the file name.
Note: To prevent duplicate file names, select Date or Unique Identifier.

Default Subject

Set a maximum of 80 full-width/half-width characters for the default subject for E-mail and Internet Fax transmission.
Add Job Information Automatically to the Mail Message Body
You can automatically add job information to the body message of e-mail.
Add a Footer Automatically to the Mail Message Body
You can add any text as a footer to the body message of e-mail.
Mail Footer Registration
When [Add a Footer Automatically to the Mail Message Body] is enabled, set a maximum of 900 full-width/half-width
characters for the footer.
Subject Name Settings
You can save a preset subject for transmitted files. Click the [Add] key and set a maximum of 80 full-width/half-width
characters for the subject.
File Name Settings
You can save a preset file name for transmitted files. Click the [Add] key and set a maximum of 80 full-width/half-width
characters for the file name.
Message Body Settings
You can save a preset e-mail subject and body message (fixed text). Click the [Add] key and set a maximum of 80
full-width/half-width characters for the subject, and a maximum of 1800 full-width/half-width characters for the body
message (fixed text).

Internet Fax Settings

Settings related to the image send function (Internet fax, Direct SMTP, etc.) can be configured.
For an explanation of settings related to the fax function, see
These settings can be configured when the Internet fax expansion kit is installed.
Default Settings
Configures the default settings for Internet fax.
Resolution Setting
Apply the Resolution Set when Stored
You can apply the resolution setting that was set when the file was saved to transmission of the file.
Resolution Setting
Set the resolution used for file transmission.
Half Tone
Enable half-tones.
"Image Send Settings (page
7-102
7-177)".