Scan Size And Send Size (Enlarge/Reduce) - Sharp MX-3050N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE

SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE)

When the original is placed, its size is automatically detected.
In normal mode, the size of the placed original is indicated as the "Scan Size", and the size to be transmitted is indicated
as the "Send Size".
Address Book Address Touch to input Address
Subject
File Name
Colour Mode
Auto/Mono2
Resolution
200x200dpi
File Format
PDF
Original
Scan Size
Exposure
100%
Auto Auto
A4
Others
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. For example, if the
scan size is A4 (8-1/2" x 11") and the send size is B5 (5-1/2" x 8-1/2"), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
► THE SIZE OF THE PLACED ORIGINAL (page 5-13)
• When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the
original scan size.
► SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-45)
► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-46)
Global Address Search
Sending History
Call Search Number
Options
Verification Stamp
Call Program
Call Registered settings
Check Send/Receive
Status
Preview
CA
Send Size
Auto
Start
A4
Scan Size
"Send Size" is set to B5
(5-1/2" x 8-1/2")
A4
Transmission
The image is reduced to B5
(5-1/2" x 8-1/2") before
transmission
5-44