Copy Colour Modes - Sharp MX-3050N User Manual

Digital full colour multifunctional system

Hide thumbs Also See for MX-3050N:

Table of Contents

COPIER►BASIC PROCEDURE FOR MAKING COPIES

COPY COLOUR MODES

Select the colour mode from Auto, Full Colour, B/W, 2 Colour, and Single Colour.

The machine automatically detects whether each original is colour or black & white and switches the mode

appropriately (full colour for a colour original or black & white for a black & white original).

The original is copied in full colour.

The original is copied in black and white.

The original is copied in two colours by changing a specific colour used in the original to another colour. If red

is set to a specific colour, reddish parts in an original are extracted, and changed to the specified colour to

make a copy.

Single Colour*

The original is copied in any one colour regardless of the colours used in the original.

* Can be set in normal mode.

If any colour mode is selected, copying takes place in black and white when you tap the [B/W Start] key.

• To change the default colour mode:

In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Colour Mode].

• To change the standard to detect Black & White and Colour:

In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Detect Standard in

Auto Colour Mode].

When the colour mode is set to auto in copy mode, the discrimination point for detecting whether originals are colour or

black and white can be set to one of 5 levels. When set to [Closer to B/W], the originals are easier to recognize as black

and white. When set to [Closer colour], the originals are easier to recognize as colour.

• When auto mode is used, there may be some originals for which switching between colour and black & white does not

take place correctly. If so, tap the [Colour Start] or [B/W Start] key to manually switch between colour and black & white.

• When [B/W Start] is selected, the [Colour Start] key cannot be tapped.

Tap the [Colour Mode] key.

Select the colour mode.

After the settings are completed, tap

Check that the specified colour mode is selected.

Table of Contents