Sleep Mode Power Level - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS
Pattern
Mode2 (Job Start
Priority2)
Mode3 (Energy Saving
Priority1)
Mode4 (Energy Saving
Priority2)
Sleep Mode Power
Level
Automatic
This function controls the power optimally for each time period by analyzing the use of machine based on job logs
obtained during a certain time period.
If the machine does not have the 4-week job log information, the machine enters the template2 (Mode3 (Energy Saving
Priority1) between 8:00 and 18:00 hours). Then after that, it enters Mode4 (Energy Saving Priority2).
Manual
You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1
to 4".
Three-pattern template
Template
Template 1
Template 2
Template 3

Sleep Mode Power Level

Low Power: The machine switches to the power saving mode, but it takes some time to recover.
Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.
Motion Sensor:This enables switching of power saving modes by the motion sensor.
Transition time
After 30 minutes
After 5 minutes
After the minimum time period
Low Power :The machine switches to the power saving mode, but it
takes some time to recover.
Fast Wake Up :Compared with Low Power, the power value rises
by a certain degree, but it results in faster recovery.
Motion Sensor:This enables switching of power saving modes by
the motion sensor.
Pattern
All Day "Energy Save
Priority2"
8:00-18:00 "Energy Save
Priority1"
8:00-18:00 "Job Start
Priority1"
Description of mode
The machine runs in the "Mode4 (Energy Saving Priority2)" all the
time.
The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00
and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and
18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
7-156
Average outputs per
hour
150 to 699
40 to 149
Up to 39
–