Setting Mode List; Status; Address Book - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SETTING MODE LIST

SETTING MODE LIST

SETTING MODE LIST
The following is a list of setting mode items, factory default settings and restrictions for each item.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• Some setting items can only be configured on the Web page.

Status

■
Status (page 7-45)
● Machine Identification (page 7-45)
●
Total Count (page 7-46)
●
Device Status (page 7-46)
● Network Status (page 7-47)
●
Firmware Version (page 7-47)
●
Power Reset (page 7-48)
● Data List (page 7-48)
List for User
List for Administrator
* Some settings can only be configured by the administrator.

Address Book

■
Address Book (page 7-50)
●
Address Book (page
●
Category Setting (page
*1 This setting is configured in setting mode on the web page.
*2 Set the Category Setting in System Settings→Image Send Settings→Common Settings→Category Setting of the machine's
setting mode.
Setup Items
Setup Items
1
7-50)*
2
7-52)*
U: General user; A: System administrator/Administrator
Factory default setting
–
–
–
–
–
–
–
–
–
U: General user; A: System administrator/Administrator
Factory default setting
–
–
7-5
U A
*
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
Yes Yes
No Yes
U A
Yes Yes
Yes Yes