Public Folder / Nas Setting; Proxy Setting; Wireless Settings; Current Setting - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Public Folder / NAS Setting

The "public", "shared" and "faxreceive" folders of the MFP can be accessed as network folders from a network PC.
Settings
Item
public
shared
faxreceive

Proxy Setting

Access the network through a proxy server.
Settings
Item
Proxy Setting
Proxy Server Address
User Name
Password
Port Number
Address without Using Proxy

Wireless Settings

It provides access to a network via a wireless LAN.
Clicking the [Submit] button stores the settings.
Connection Type
Use this setting to switch between [Wired Only], [Wired+Wireless (Access Point Mode)] or [Wireless (Infrastructure
Mode)].

Current Setting

Shows settings, such as the SSID of a wireless LAN and security type. If the wireless LAN is disabled, "--" appears.
Current Wireless Status
This shows reception levels (Max. 100) of the wireless LAN and IP addresses.
Show Wireless Setting Screen
Click the [Setup] button.
In the Wireless Setting screen, you can configure the SSID of a wireless LAN, Security Type, Encry., and Security Key.
Initialize Wireless Settings
Click the [Initialize] button.
The settings for SSID, Security Type, Encry., and Security Key are initialized.
When [Use of Storage] is set to [Allow], the PDF files for PC viewing in the "public" folder
can be accessed.
If the [Use of Storage] is set to [Allow], you can use the "shared" folder as a network folder.
If the [Use of Storage] in set to [Allow], you can use the "faxreceive" folder as a fax/Internet
fax received data. The "faxreceive" folder contains files of "Settings for HDD Storing of
Received Data".
Set whether proxy settings are used.
Enter the proxy server address.
Enter a user name to access the proxy server.
Enter a password to allow access to the proxy server.
Enter the proxy server port number.
Specify exception addresses for a proxy that is used in the Web browsing feature and
Sharp OSA. When you enter multiple addresses, separate them by a semicolon (;).
7-142
Settings
Description