Table of Contents
Advertisement
6.
Holding the print cartridge by its top centre, lower it into place in the printer, locating
the pegs at each end into their slots in the sides of the printer cavity.
7.
Finally, close the top cover and press down firmly at both siders so that the cover
latches closed.
NOTE
If you need to return or transpot your printer for any reason, please make sure
you remove the print cartridge beforehand and place in the bag provided. This
is to avoid toner spillage.
R
EPLACING THE TRANSFER BELT UNIT
The belt unit is located under the four print cartridges.
Switch off the printer and allow the fuser to cool for about 10 minutes before opening the
cover.
1.
Press the cover release and open the printer's top cover fully.
If the printer has been powered on, the fuser will be hot. This area
is clearly labelled. Do not touch.
2.
Note the positions of the four cartridges.
WARNING!
1. White Print Cartridge
3. Yellow Print Cartridge
Maintenance > 64
1
2
3
4
2. Magenta Print Cartridge
4. Cyan Print Cartridge
Advertisement
Table of Contents
