ZyXEL Communications VMG1312 Cli Reference Manual page 88

www.zyxel.com
channels
Return valid channels for the current settings.
channels_in_country
Return valid channels for the country specified.
Arg 1 is the country abbreviation
Arg 2 is the band(a or b)
curpower
Return current tx power settings.
-q (quiet): estimated power only.
curppr
Return current tx power per rate offset.
txinstpwr
Return tx power based on instant TSSI
scansuppress
Suppress all scans for testing.
0 - allow scans
1 - suppress scans
evm
Start an EVM test on the given channel, or stop EVM test.
Arg 1 is channel number 1-14, or "off" or 0 to stop the test.
Arg 2 is optional rate (1, 2, 5.5 or 11)
rateset
Returns or sets the supported and basic rateset, (b) indicates basic
With no args, returns the rateset. Args are
rateset "default" | "all" | <arbitrary rateset> -m <arbitrary mcsset>
default - driver defaults
all - all rates are basic rates
arbitrary rateset - list of rates
arbitrary mcsset - list of mcs rates octets, each bit representing
List of rates are in Mbps and each rate is optionally followed
by "(b)" or "b" for a Basic rate. Example: 1(b) 2b 5.5 11
At least one rate must be Basic for a legal rateset.
roam_trigger
Get or Set the roam trigger RSSI threshold:
Get: roam_trigger [a|b]
Set: roam_trigger <integer> [a|b|all]
ZyXEL Confidential
corresponding mcs
88