ZyXEL Communications VMG1312 Cli Reference Manual page 49

www.zyxel.com
wan add service
add a service layer 3 WAN interface – such as pppoe, ipoe, bridge and pppoa and ipoa connection
based on a layer 2 interface.
wan show interface
displays the current layer 2 interfaces configured in the system with information on xDSL type
(ATM/PTM) and port, link type andncapsulation
service category
wan show
displays the layer 3 wan services configured in the system with information on WAN interface service
name, WAN interface name, WAN protocol, WAN connection status, and WAN IP address.
wan delete service
delete the layer 3 WAN connection service.
wan delete interface
delete the layer 2 xDSL interface.
wan --help
display usage for WAN commands.
OPTIONS
Options for the add interface command
Usage:
wan add interface <atm|ptm>
wan add interface atm <port.vpi.vci>
--linktype [EoA|PPPoA|IPoA] [--encap <llc|vcmux>]
[--atmcat UBR | --atmcat UBRwPCR <pcr> | --atmcat CBR <pcr>
[--atmcat nrtVBR <pcr> <scr> <mbs> | --atmcat rtVBR <pcr> <scr> <mbs>]
wan add interface ptm <port> [--priority <normal|high|both>]
<port.vpi.vci> (atm)
port: port number of the ATM VCC to add.
Valid values: 0.
vpi: VPI of the VCC to add.
Valid values: 0 - 255.
Default value: 0
Vci: VCI of the VCC to add.
Valid values: 32 - 65535.
Default value: 35.
ZyXEL Confidential
49