ZyXEL Communications VMG1312 Cli Reference Manual page 76

www.zyxel.com
Example return:
wl0: May 8 2007 20:35:49 version 4.150.6.0
...............
...............
srdump
Prints the contents of SPROM to STDOUT (dumps 64 16-bit words of the SROM present on-board).
For details of the individual locations, check the Broadcom SROM memory map for that specific
design. Memory maps are different, depending on the type of the design (for example, Mini PCI,
Cardbus, PCMCIA, and so on).
Syntax:
> wlctl srdump
Example return:
0x3001 0x0000 0x046d 0x14e4 0x4329 0x8000 0x0002 0x0000
srom[008]: 0x1000 0x1800 0x0000 0x0000 0xffff 0xffff 0xffff 0xffff
...........................................................................
clk
set board clock state. return error for set_clk attempt if the driver is not down
0: clock off
1: clock on
srclear
Clears first 'len' bytes of the srom, len in decimal or hex
Usage: srclear <len>
srwrite
Write the srom: srwrite byteoffset value
srcrc
Get the CRC for input binary file
ciswrite
Write specified <file> to the SDIO CIS source (either SROM or OTP)
cisupdate
Write a hex byte stream to specified byte offset to the CIS source (either SROM or OTP)
--preview
option allows you to review the update without committing it
<byte offset> <hex byte stream> [--preview]
cisdump
Display the content of the SDIO CIS source
-b <file> -- also write raw bytes to <file>
<len> -- optional count of bytes to display (must be even)
ZyXEL Confidential
76