ZyXEL Communications VMG1312 Cli Reference Manual page 87

www.zyxel.com
--bss_type=BT
-b MAC, --bssid=MAC
-n N, --nprobes=N
-a N, --active=N
-p N, --passive=N
-h N, --home=N
-c L, --channels=L
passive
Puts scan engine into passive mode
regulatory
Get/Set regulatory domain mode (802.11d). Driver must be down.
spect Get/Set 802.11h Spectrum Management mode.
0 - Off
1 - Loose interpretation of 11h spec - may join non-11h APs
2 - Strict interpretation of 11h spec - may not join non-11h APs
3 - Disable 11h and enable 11d
4 - Loose interpretation of 11h+d spec - may join non-11h APs
scanabort
Abort a scan.
scanresults
Return results from last scan.
iscanresults
Return results from last iscan. Specify a buflen (max 8188)
to artificially limit the size of the results buffer.
iscanresults [buflen]
assoc
Print information about current network association.
(also known as "status")
status
Print information about current network association.
(also known as "assoc")
disassoc
Disassociate from the current BSS/IBSS.
chanlist
Deprecated. Use channels.
ZyXEL Confidential
[bss/infra|ibss/adhoc] bss type to scan
particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
number of probes per scanned channel
dwell time per channel for active scanning
dwell time per channel for passive scanning
dwell time for the home channel between channel scans
comma or space separated list of channels to scan
87