ZyXEL Communications VMG1312 Cli Reference Manual page 105

www.zyxel.com
del -- Removes a pattern from the list
clr -- Clear current list
offset -- Starting offset for the pattern
mask -- Mask to be used for pattern. Bit i of mask => byte i of the pattern
value -- Value of the pattern
wowl_wakeind
usage: wowl_wakeind [clear]
Shows last system wakeup event indications from PCI and D11 cores
clear - Clear the indications
wowl_status
usage: wowl_status [clear]
Shows last system wakeup setting
wowl_pkt
Send a wakeup frame to wakup a sleeping STA in WAKE mode
Usage: wlctl wowl_pkt <len> <dst ea | bcast | ucast <STA ea>>[ magic [<STA ea>] | net
<offset> <pattern>]
e.g. To send bcast magic frame -- wlctl wowl_pkt 102 bcast magic 00:90:4c:AA:BB:CC
To send ucast magic frame -- wlctl wowl_pkt 102 ucast 00:90:4c:aa:bb:cc magic
To send a frame with L2 unicast - wlctl wowl_pkt 102 00:90:4c:aa:bb:cc net 0 0x00904caabbcc
NOTE: offset for netpattern frame starts from "Dest EA" of ethernet frame.So dest ea will be used only
when offset is >= 6
wme_apsd_trigger
Set Periodic APSD Trigger Frame Timer timeout in ms (0=off)
wme_autotrigger
Enable/Disable sending of APSD Trigger frame when all ac are delivery enabled
reassoc Initiate a (re)association request.
Usage: wlctl reassoc <bssid> [options]
Options:
-c CL, --chanspecs=CL
send_nulldata
Sed a null frame to the specified hw address
btc_params
g/set BT Coex parameters
btc_flags
g/set BT Coex flags
ZyXEL Confidential
chanspecs (comma or space separated list)
105