ZyXEL Communications VMG1312 Cli Reference Manual page 54

www.zyxel.com
> wan add service ptm0/0 --protocol ipoe --dhcpclient enable --nat enable --firewall enable
--dnsifname ptm0 --gatewayifname ptm0
To delete:
> wan delete service ptm0
> wan delete interface ptm 0 --priority normal
° Configure a bridge configuration
ATM interface:
To add:
> wan add interface atm 0.2.35 --linktype eoa
> wan add service atm0/0.2.35 --protocol bridge
To delete:
> wan delete service atm0
> wan delete interface atm 0.2.35
PTM interface:
> wan add interface ptm 0 --priority normal
> wan add service ptm0/0 --protocol bridge
To delete:
> wan delete service ptm0
> wan delete interface ptm 0 --priority normal
° Configure a IPoA configuration with fireware and NAT
ATM interface only:
To add:
> wan add interface atm 0.0.40 --linktype ipoa --encap llc
> wan add service ipoa0/0.0.40 --protocol ipoa --ipaddr 10.6.33.229 255.255.255.192 --nat enable
--firewall enable
dns config static 10.6.33.1
Note: Normally, need to config a static dns ip address for this wan connection to work
To delete:
> wan delete service ipoa0
> wan delete interface atm 0.0.40
° Configure a PPPoA interface
ATM interface only:
To add:
> wan add interface atm 0.0.36 --linktype pppoa --encap vcmux
> wan add service atm0/0.0.36 --protocol pppoa --username script --password script --dnsifname
pppoa0 --gatewayifname pppoa0
To delete:
> wan delete service pppoa0
> wan delete interface atm 0.0.36
° Display all WAN interfaces
wan show (PTM):
ZyXEL Confidential
54