Summary of Contents for ZyXEL Communications VMG8825-T50
Page 1
Use the Ethernet cable to connect from the blue WAN port on the router to the ethernet port on the Optical Network Termination point (ONT). Connect the power cable to the VMG8825-T50 and press the power button. Note: It may take a couple of minutes to set up.
Page 2
Tapping Screw M4x30 mm Insert the screw anchors and screws (not provided). 7.5~8.0 30.75~32.75 4.00~4.15 Place the VMG8825-T50 so the wall mount holes line up with the screws (4-a & b). 2.0~2.3 Unit: mm Slide the VMG8825-T50 down gently to locate into place.