ZyXEL Communications VMG1312 Cli Reference Manual page 55

www.zyxel.com
VCC Con. Service Interface
ID Name
N/A 0 ipoe_0_0_1 ptm0
Wan show (ATM):
All services associated with atm2 is activated.
VCC Con. Service
ID Name
0.0.35 0 pppoe_0_0_35 ppp0 PPPoE
0.0.36 0 pppoa_0_0_36 pppoa1 PPPoA
0.2.35 0 ipoe_0_2_35
° Display help usage for bridge/ipoe/pppoe/ipoa/pppoa
wan –help bridge
Usage: wan config <port.vpi.vci>
[--protocol <bridge|pppoe|pppoa|mer|ipoa>] [--encap <llc|vcmux>]
[--state <enable|disable>] [--service <servicename>]
wan delete <port.vpi.vci>
wan show [<port.vpi.vci>]
wan --help <bridge|pppoe|pppoa|ipoe|ipoa>
wan –help ipoe
Usage:
wan add service <L2interfacename> --protocol ipoe
[--firewall <enable|disable>] [--nat <enable|disable>]
[--igmp <enable|disable>]
[--ipaddr <wanipaddress> <wansubnetmask]
[--dhcpclient <enable|disable>]
[--gatewayifname <L2interfacename>] [--dnsifname <L2interfacename>]
wan delete interface atm <port.vpi.vci>
wan delete interface ptm <port> --priority <normal|high|both>
wan delete service L3IfName
wan show interface
wan show [<port.vpi.vci>]
wan --help <bridge|pppoe|pppoa|ipoe|ipoa>>
wan –help pppoe
Usage:
wan add service <L2interfacename> --protocol pppoe
[--firewall <enable|disable>] [--nat <enable|disable>]
[--igmp <enable|disable>]
[--username <username> --password <password>]
[--pppidletimeout <timeout>] [--pppipextension <disable|enable>]
[--gatewayifname <pppinterfacename>] [--dnsifname <pppinterfacename>]
wan delete interface atm <port.vpi.vci>
wan delete interface ptm <port> --priority <normal|high|both>
ZyXEL Confidential
Proto.
Name
IPoE Disable Connected
Interface Proto.
Name
atm2 IPoE
55
IGMP Status
IGMP Status
Disable Connected
Disable Connected
Disable Connected
IP
address
10.6.37.15
IP
address
10.6.33.155
10.6.33.156
10.6.33.197