ZyXEL Communications VMG1312 Cli Reference Manual page 75

www.zyxel.com
> wlctl event_msgs
Event messages bit vector:
WLC_E_SET_SSID 0 /* indicates status of set SSID */
WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */
WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */
WLC_E_AUTH 3 /* 802.11 AUTH request */
counters
Returns the driver counter values.
Syntax:
> wlctl counters
Example return:
txframe 92289 txbyte 7637260 txretrans 830936 txerror 0 rxframe 90957 rxbyte 665
3890 rxerror 17
txprshort 4398 txdmawar 0 txnobuf 0 txnoassoc 0 txchit 116 txcmiss 92173
reset 14926 txserr 0 txphyerr 1 txphycrs 0 txfail 689
d11_txfrag 509883 d11_txmulti 12 d11_txretry 267653 d11_txretrie 266858
d11_txrts 0 d11_txnocts 0 d11_txnoack 829661 d11_txfrmsnt 284515
rxcrc 3824120 rxnobuf 0 rxnondata 0 rxbadds 0 rxbadcm 0 rxdup 1017 rxfragerr 0
rxrunt 14 rxgiant 0 rxnoscb 0 rxbadproto 0 rxbadsrcmac 3
staname
Gets/sets the station name.
Syntax:
> wlctl staname
Returns your machine name. If the STA name has not been set by the operating system, a get staname
command returns a NULL string. The maximum STA name length (set/get) is 15 bytes.
apname
Gets the current associated AP name. If the client is not associated to an AP, a stale AP name might
be returned. The maximum AP name length is 15 bytes.
Syntax:
> wlctl apname
dump
Prints the driver software state and chip registers to STDOUT.
Syntax:
> wlctl dump
ZyXEL Confidential
75