Range And Oven Storage; Water Heater; Maintenance Of Water Heater - Jayco 2004 Talon ZX Owner's Manual

Clean all surfaces quickly after boil overs or spillovers. Use a dry towel or cloth to soak up spills.
ALL SURFACES - When surface is cool, clean with warm soapy water, rinse and dry with soft
cloth. Additional cleaning measures:
• Control Knobs - pull the knobs straight off the stems and clean.
• Control Panel - You may use a spray glass cleaner, applying cleaner to a paper towel (do
not spray directly on panel).
• Cook Top Surface - You may use a mile liquid cleaner /glass cleaner.
• Surface Burner Grates - They should be cleaned as soon as they become dirty. You may
need to use a non-abrasive plastic scrubbing pad.
• Surface Burners, Burner Ports or Orifices - if clogged, gently brush perforated areas with
a lightweight brush (toothbrush) or carefully clean holes out with a toothpick.
NOTE: Heavy burned on soil may require repeated cleaning steps until the soil is completely
removed.
NOTE: The grate and surface of the cooktop is covered with porcelain coating. Porcelain is
a glass/ceramic coating glazed to the surface of the metal. Porcelain is designed to
provide a surface that can withstand high temperatures and maintain an attractive
appearance and make it easier to clean.

Range and Oven Storage

Dry all surfaces and burner box, then spray surfaces with an oil base substance to preserve the
surface from rusting during long term storage. Wipe off oil coating before reuse.

WATER HEATER

Maintenance of Water Heater

I
WARNING: If the user of the appliance fails to maintain it in the condition in which it
was shipped from the factory or if the appliance is not used solely for its intended
purpose or if appliance is not maintained in accordance with the instructions in the
manual, then the risk of a fire and/or the production of carbon monoxide exists which
can cause personal injury, property damage or loss of life.
I
WARNING: For your safety, all repairs should be performed by your dealer or a
qualified service person.
1. Main Burner: Do not allow the burner to burn with a yellow flame, because sooting will
occur. (See Safety Warnings) If the burner flame is yellow and has an erratic pattern, shut
unit down and contact a qualified service agency. Do not continue operating unit with
improper burner flame. (See Fig. ??)
2. Periodically inspect unit for soot. If soot is present anywhere on water heater, immediately
shut unit down and contact your dealer or a qualified service person. Soot is a sign of
incomplete combustion and must be corrected before operatin water heater. Areas to check
would include:
106 Talon Owner's Manual