Spare Tire Carrier (Option) - Jayco 2004 Talon ZX Owner's Manual

SPARE TIRE CARRIER (OPTION)

The following procedures should be used in securing the spare tire in the travel position. Follow the
reverse procedure to release the tire for use.
1. Put the steel hoist lift support loaded on the end of the cable through the rim of the tire (Fig.
7-9). The hoist lift support clips (Fig. 7-10) need to seat inside of the center hole of the tire
rim. The valve stem of the tire MUST be pointed in the up position or toward the bottom of
the sport utility trailer.
2. Insert the crank handle into the hole located in the center of the rear "bumper". Turn the
crank handle to lift the tire into the travel position. Two crisp breaks must be heard and felt
to insure proper seating of the tire for travel. Fig. 7-11 illustrates the travel position of the
spare tire. The tire will be in contact with the brackets.
Bracket
I
WARNING: DO NOT exceed the maximum load capacities of 100 lbs. for the hoist.
DO NOT use air driven guns or impact wrenches to lift the tire into the travel
position.
112
Fig. 7-9
TIRE LIFT MOUNTING SURFACE
Spare Tire
Fig. 7-11
Fig. 7-10
Bracket
Cable
Talon Owner's Manual