Couch Operation - Jayco 2004 Talon ZX Owner's Manual

COUCH OPERATION

1. Release the strap holding the bed/sofa in place from the hasp
d-ring (Fig. 3-11) on each end.
2. Pull down on the metal support bar (Fig. 3-12) under the
bed/sofa. The legs will fold out and into place. When pulled
out from the wall, the unit will be in the bed position.
3. To set up as a couch, stand at the end of the bed. Pull up on the
top of the sofa back rest (against the wall) and the front edge to
create a V. Push the front edge toward the wall to move the
unit into the sofa position.
4. To move the sofa back into the bed position, pull up on the front edge of the sofa (Fig. 3-13)
to create the V.
5. Push down on the top of the back rest cushion and the front edge of the sofa to lay it into the
bed position.
6. To store the bed/sofa against the wall, it is necessary to have it in the bed position.
I
CAUTION: To store the bed/sofa and pull down bunk for travel, always raise the
mini-blinds.
I
CAUTION: Be aware of moving parts at the end of the bed/sofa when changing from one
position to the other. Keep all loose clothing, fingers, etc. away from the ends.
26
Fig. 3-12
Fig. 3-11
Fig. 3-13
Talon Owner's Manual