Generator; Periodic Maintenance; Range And Oven - Jayco 2004 Talon ZX Owner's Manual

7. Remove the mounting screws and the power board cover.
8. Replace the unservicable fuse(s) with the new fuse(s) of the correct type and size.
9. Reverse this procedure and assemble the power board cover and all wiring.
10. If the fuse(s) continues to become unservicable, consult your dealer or a Norcold authorized
service center.

GENERATOR

Periodic Maintenance

Periodic maintenance is essential for toper performance and long genset life. Refer to the specifics
for each maintenance operation in the manufacturer's owner's manual. Under hot or dusty
operating conditions some maintenance operations should be performed more frequently, as
indicated by the manufacturer. Keep a log of maintenance performed and the hours run. Recording
maintenance will remind you to do maintenance at regular intervals and provide a basis for
supporting warranty claims.
Maintenance, replacement or repair of emission control devices and systems may be performed by
any engine repair establishment or individual. However, warranty work must be completed by an
authorized Onan dealer or distributor.

RANGE AND OVEN

I
WARNING:
• Make sure all controls are OFF and the range or cooktop is cool before
cleaning.
• Make sure that all cooktop surfaces, burner grates and bruners are cool
before cleaning or disassembling cooktop.
• Do not use oven cleaners, bleach, or rust removers on the cooktop or burner
grates.
• Do not obstruct the flow of combustion and ventilation air.
• Keep appliance area clear of combustible materials, gasoline and other
flammable vapors and liquids.
• Clean oven with oven cleaner only. Follow directions on the container.
• Never use a wire brush or metallic item for cleaning burner ports or orifices.
Brush may "shed" bristles, that may lodge in the orifice or burner ports and
cause a fire or explosion.
104 Talon Owner's Manual