Symbol PDT 8000 Product Reference Manual page 286

PDT 8000 Series with Windows
If one of the partitions being built is the ESSID, a prompt appears requesting the
ESSID value. Deselect the HR (High Rate) check box when building ESSID images
for a device with an FH radio.
If one of the partitions being built is the Splash Screen, a prompt appears
requesting both the source Bitmap file and the destination HEX file.
6. A check is performed and if there are no errors, the partition hex files are created.
If the build fails, the hex files are not be created and TCM displays an error message. Two
of the most common reasons for a build failure are:
• Files defined in the script can not be found. This error can occur when the files
referenced by the script are no longer stored on the development computer or the
folders where they are stored were renamed.
• The total amount of flash memory space required by the script exceeds the image
size. To correct this, reduce the number of files in the partition or increase the size
of the partition. See
about setting the image size appropriately.
12-12
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Figure 12-6. Build ESSID Partition Window
Defining Script Properties on page 12-7 for more information