Symbol PDT 8000 Product Reference Manual page 132

PDT 8000 Series with Windows
Configuration of the DHCP Server
If you use a DHCP server to distribute IP addresses and other network parameters, setup
the server as following:
• IP address pool (1 or 5 IP address per cradle)
• router/gateway address
• one or more DNS server addresses
• one or more WINS server addresses
• the subnet mask.
Note: To assign the initial cradle IP address, you can either use a DHCP
server, as shown above, or use the MobileDox Cradle Manager, as
illustrated in
is the preferred method.
Configuration of the Cradle
The MobileDox Cradle Manager allows you to setup the Device IP Address and modify
cradle settings. See
download and install the software.
4-32
®
Configuration of the Cradle
Installing MobileDox Cradle Manager
Mobile 2003 Software for Pocket PCs Product Reference Guide
on page 4-32. DHCP server
on page 4-10 for instructions to