Symbol PDT 8000 Product Reference Manual page 252

PDT 8000 Series with Windows
2. Change the values for the parameters, as necessary. Parameter names appear in
quotes followed by an = sign (for example, "CurrentContext"=). Only change the
text followed by the = sign.
A sample registry file is included below. See
File on page 10-13.
3. Once all changes have been made, save the file. If you are using Microsoft
Notepad, click File - Save to save it under the current name or click File - Save As
to save it under a different name.
Note: When saving the file, ensure that you do not change the file type, i.e.
ensure you are saving the file as a .reg file.
To load the file back on the terminal
1. Establish an ActiveSync connection between the host computer and the terminal.
See Chapter 4, Communications
2. In ActiveSync, click Explore. Windows Explorer will open the Mobile Device
window for your device.
3. Open another Windows Explorer window and browse to the file that you want to
copy on your device, i.e. the updated or new registry file you created.
4. Right-click the file and click Copy. Place the cursor in the Application folder on your
Mobile Device, right-click, and click Paste.
5. Hard reset the terminal, so new registry settings can be merged. See
a Hard Reset
Sample Network Parameter Registry File
The following sample provides 3 contexts, with one of them the active context. Parameter
names appear in quotes followed by an = sign (for example, "CurrentContext"=). Only
change the text followed by the = sign.
; --------------------------------------------------------------------
; GPRS Network Specific Parameters
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Seriald3]
"CurrentContext"=dword:1
"Version"="1.0"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Seriald3\Context1]
;
; 1st of 3 selectable Contexts
10-14
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
for detailed instructions.
on page 2-35.
Sample Network Parameter Registry
Performing