Symbol PDT 8000 Product Reference Manual page 115

4. Connect the USB cable to your terminal and host PC as shown below:
Figure 4-10. USB Cable Connection to Host PC
5. If this is your first synchronization, follow the instructions on the host computer
screen to setup the partnership. Items to be synchronized may be customized, and
you may select to synchronize continuously as information changes, upon
connection, or manually by clicking the Sync button on the toolbar of your host
computer.
Note: Every PDT 8000 terminal should have a unique name. Never try to
synchronize more than one PDT 8000 terminal to the same user
name.
6. If you already created a partnership between your host computer and terminal,
synchronization will occur automatically, immediately following step 4.
To USB port of
host computer
Communications
USB cable
4-15