Symbol PDT 8000 Product Reference Manual page 233

5. Select the Ping tab to send and receive ICMP ping packets across the network to
the specified IP address.
Figure 9-22. Mobile Companion - Ping Tab
6. Select or enter a target device IP address from the IP drop-down list.
7. Select the size of the packet transmission from the Size drop-down list.
8. Tap Start Test to begin the ping test.
9. Tap Stop Test to terminate the ping test.
10. The average mega-bits per second, signal strength, data rate currently in use, test
statistics and round trip (RT) times are displayed for each test. The associated AP
MAC address is also displayed. The signal strength level and the data transmission
rate are displayed in real-time bar graphs.
Spectrum24 Network Configuration
9-25