Using The Vehicle Cradle - Symbol PDT 8000 Product Reference Manual

PDT 8000 Series with Windows
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery fully charges in less than four
hours, if the terminal is not in use. See
indications.

Using the Vehicle Cradle

To charge the terminal's battery using the Vehicle Cradle:
1. Connect the cradle to a power source.
Note: For detailed instructions on power connection, refer to the
VCD8000-R000 Quick Reference Guide.
2. Insert the terminal into the cradle. The terminal starts to charge automatically.
Figure 1-12. Inserting the Terminal into the Vehicle Cradle
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery fully charges in less than four
hours, if the terminal is not in use. See
indications.
1-16
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Charge LED Indicator
Terminal
Charge LED
Charge LED Indicator
on page 1-22 for other
on page 1-22 for other