Using The Single-Slot Modem Cradle Or The Snap-On Modem - Symbol PDT 8000 Product Reference Manual

Using the Single-Slot Modem Cradle or the Snap-On Modem

1. Install ActiveSync on your host computer. See
Note: Before communicating through a modem connection, you must
create a partnership between your terminal and your host computer.
See
2. Install eConnect on your terminal. See
3. On your terminal, tap Start - ActiveSync - Tools - Options - PC and:
a. deselect the Enable synchronization when cradled using: check box to
temporarily disable serial cable detect before using ActiveSync.
b. select the Include PC when synchronizing remotely and connect to: check box
to ensure the host computer you wish to synchronize with is identified.
4. On your terminal:
a. Tap Start - Settings - Connections tab - Connections icon - Advanced tab.
Setting up a Partnership
Installing ActiveSync
on page 4-4 for detailed instructions.
Installing eConnect
Communications
on page 4-3.
on page 4-9.
4-19