Symbol PDT 8000 Product Reference Manual page 121

d. Tap New... to create a new connection.
e. Enter 'SnapOnModem' for the connection in the Enter a name for the
connection: text box.
f. If you are using the single-slot modem cradle, select Hayes Compatible on
COM1 from the Select a modem: drop-down menu.
If you are using the snap-on modem, select Powered Serial on COM7 from the
Select a modem: drop-down menu.
g. Tap Next.
h. Enter the telephone number to dial.
Note: Depending on the location when dialing, additional numbers may
need to be dialed (e.g., a 9 prefix is often required if dialing from
work; a country code is needed if dialing internationally). To avoid
creating new modem connections for each situation, tap use dialing
Communications
4-21