PDT 8000 Series with Windows
Replacing the Handstrap
The terminal has a factory-installed handstrap which increases comfort when holding the
terminal for extended periods of time. The handstrap may be removed or replaced, if
damaged.
To remove the handstrap:
1. Unscrew the end cap/handstrap bar off the terminal.
2. Remove the pin that connects the handstrap to the end cap/handstrap bar.
3. Unhook the bottom of the handstrap from it's slot on the battery cover.
1-28
®
PDT8056
PDT8056
PDT8056
Mobile 2003 Software for Pocket PCs Product Reference Guide
PDT8000, PDT8037, PDT8046
PDT8000, PDT8037, PDT8046
PDT8000, PDT8037, PDT8046