Configuration Summary - ZyXEL Communications PMG5318-B20B User Manual

Table 18 WAN Service: DNS Server: PPPoE or IPoE (continued)
LABEL
Primary DNS
server
Secondary DNS
server
Obtain IPv6 DNS
info from a WAN
interface
WAN Interface
selected
Use the following
Static IPv6 DNS
address
Primary IPv6
DNS server
Secondary IPv6
DNS server
Back
Next

4.2.1.7 Configuration Summary

This read-only screen lets you review a summary of the WAN connection settings before you apply
them.
Figure 23 WAN Service: Configuration Summary
Table 19 WAN Service: Configuration Summary
LABEL
Connection Type
NAT
Full Cone NAT
Firewall
IGMP Multicast
Proxy
Chapter 4 WAN
DESCRIPTION
Enter the first DNS server address assigned by the ISP.
Enter the second DNS server address assigned by the ISP.
Select this to have the GPON Device get the IPv6 DNS server addresses from the ISP
automatically.
Select a WAN interface through which you want to obtain the IPv6 DNS related
information.
Select this to have the GPON Device use the IPv6 DNS server addresses you configure
manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
This is the encapsulation method used by this connection.
This shows whether NAT is active or not for this connection.
This shows whether full cone NAT is active or not for this connection.
This shows whether the firewall is active or not for this connection.
This shows whether IGMP proxy is activated or not for this connection. IGMP is
not available when the connection uses the bridging service.
PMG5318-B20B User's Guide
34