Figure 35 Incoming IP Filtering
Table 31 Incoming IP Filtering
LABEL
Filter Name
Interfaces
IP Version
Protocol
SrcIP/ PrefixLength
SrcPort
DstIP/ PrefixLength This displays the destination IP addresses and prefix length to which this rule applies.
DstPort
Remove
Add
Remove
7.2.1 Creating Incoming Filtering Rules
In the Incoming IP Filtering Setup screen, click Add to display this screen where you can
configure an incoming IP filter rule.
Chapter 7 Security
DESCRIPTION
This displays the name of the rule.
This displays the WAN interface(s) to which this rule is applied.
This shows the IP version.
This displays the IP protocol that defines the service to which this rule applies.
This displays the source IP address and prefix length to which this rule applies.
This is the source port number.
This is the destination port number.
Select the rule(s) you want to delete in the Remove column and then click the Remove
button.
Click Add to create a new rule.
Click Remove to delete the selected rule(s).
PMG5318-B20B User's Guide
50