Route Info - ZyXEL Communications PMG5318-B20B User Manual

Figure 9 WAN Statistics
Table 5 WAN Statistics
LABEL
Interface
Description
Received
Bytes
Pkts
Errs
Drops
Transmitted
Bytes
Pkts
Errs
Drops
Reset Statistics

3.5 Route Info

Click Device Info > Route to display the GPON Device's IPv4 and IPv6 routing tables.
Chapter 3 Device Info
DESCRIPTION
This shows the name of the WAN interface used by this connection.
veip0 stands for a virtual Ethernet card and is the foundation for veip0/* which are virtual
WAN interfaces of the physical GPON line. The ppp0.* indicates a PPP connection.
eth0 ~ eth3 represent the Ethernet LAN ports 1 ~ 4 and are the foundation for eth0/*
which are virtual WAN interfaces of the physical Gigabit Ethernet line.
The number after the dot (.) represents the VLAN ID number assigned to traffic sent
through this connection. The number after the underscore (_) represents the index number
of connections through the same interface.
(null) means the entry is not valid.
This is the service name of this connection.
This indicates the number of bytes received on this interface.
This indicates the number of packets received on this interface.
This indicates the number of frames with errors received on this interface.
This indicates the number of received packets dropped on this interface.
This indicates the number of bytes transmitted on this interface.
This indicates the number of transmitted packets on this interface.
This indicates the number of frames with errors transmitted on this interface.
This indicates the number of outgoing packets dropped on this interface.
Click this to clear the screen's statistics counters.
PMG5318-B20B User's Guide
18