Wireless Advanced - ZyXEL Communications PMG5318-B20B User Manual

Table 70 Wireless Bridge
LABEL
Bridge Restrict
Save/Apply

19.5 Wireless Advanced

Click Wireless > Advanced to configure advanced wireless settings.
Chapter 19 Wireless
DESCRIPTION
Select Disabled to not restrict which APs can establish a wireless bridge connection with
the GPON Device. Any AP that has activated the wireless bridge function can establish a
connection with the GPON Device.
Select Enabled or Enabled (Scan) to only allow APs selected in the Remote Bridges
MAC Address section to establish a wireless bridge connection with the GPON Device.
Select Enabled and enter the MAC addresses of the peer devices in the Remote
Bridges MAC Address field that displays. Type the MAC address of the peer device in a
valid MAC address format (six hexadecimal character pairs, for example
12:34:56:78:9a:bc).
Select Enabled (Scan) to search for a list of nearby SSIDs and their associated MAC
addresses. Choose the APs and click Apply/Save. Click Refresh to update the list.
Note: The GPON Device can support up to 4 bridge links.
Click this to save and apply your changes.
PMG5318-B20B User's Guide
95