Create Certificate Request - ZyXEL Communications PMG5318-B20B User Manual

17.1.1 Create Certificate Request

Click the Local Certificates screen's Create Certificate Request button to open the following
screen. Use this screen to have the GPON Device generate a certification request.
Figure 67 Create Certificate Request
Table 60 Create Certificate Request
LABEL
Certificate Name
Common Name
Organization Name
State/Province Name
Country/Region Name
Apply
After you click Apply, the following screen displays to notify you that you need to get the certificate
request signed by a Certificate Authority. If you already have, click Load_Signed to import the
signed certificate into the GPON Device. Otherwise click Back to return to the Local Certificates
screen.
Chapter 17 Certificates
DESCRIPTION
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Select Auto to have the GPON Device configure this field automatically. Or select
Customize to enter it manually.
Type the IP address (in dotted decimal notation), domain name or e-mail address in
the field provided. The domain name or e-mail address can be up to 63 ASCII
characters. The domain name or e-mail address is for identification purposes only
and can be any string.
Type up to 63 characters to identify the company or group to which the certificate
owner belongs. You may use any character, including spaces, but the GPON Device
drops trailing spaces.
Type up to 32 characters to identify the state or province where the certificate owner
is located. You may use any character, including spaces, but the GPON Device drops
trailing spaces.
Select a country to identify the nation where the certificate owner is located.
Click Apply to save your changes.
PMG5318-B20B User's Guide
82