7.3.1 Creating MAC Filtering Rules
In the MAC Filtering Setup screen, click Add to display this screen where you can configure a
MAC address filter rule.
Figure 37 MAC Filtering: Add
Table 34 MAC Filtering: Add
LABEL
Protocol Type
Destination MAC
Address
Source MAC Address
Frame Direction
WAN Interfaces
Save/Apply
Chapter 7 Security
DESCRIPTION
Select the IP protocol (PPPoE, IPv4, IPv6, AppleTalk, IPX, NETBEUI or IGMP) to
which this rule applies.
Enter the destination MAC address to which this rule applies.
Enter the source MAC address to which this rule applies.
Select the traffic direction in which the filtering occurs (LAN <=> WAN, LAN =>
WAN, WAN => LAN).
Select a WAN interface from the drop to list. This is the interface to which the filtering
rule applies in bridge mode only.
Click this to save your customized settings and exit this screen.
PMG5318-B20B User's Guide
53